Advanced Chemical Solutions
  • Home
  • Shop
  • About
  • Products
    • Accessories >
      • Barrier Cream
      • Coolant Proportioner
      • Refractometers
      • Sump Tabs
    • Coolants >
      • Soluble Oils
      • Semi-Synthetic
      • Synthetic
    • Cutting Oils
    • Cleaners
    • Lube Oils >
      • Gear Oil
      • Hydraulic Oil
      • Spindle Oil
      • Way Lube
    • Metalforming
    • Rust Preventatives
    • Other Fluids
  • Technical
    • About Cutting Fluids
    • Definitions
    • Coolant Questionaire
    • Troubleshooting
  • News
  • Contact
  • Home
  • Shop
  • About
  • Products
    • Accessories >
      • Barrier Cream
      • Coolant Proportioner
      • Refractometers
      • Sump Tabs
    • Coolants >
      • Soluble Oils
      • Semi-Synthetic
      • Synthetic
    • Cutting Oils
    • Cleaners
    • Lube Oils >
      • Gear Oil
      • Hydraulic Oil
      • Spindle Oil
      • Way Lube
    • Metalforming
    • Rust Preventatives
    • Other Fluids
  • Technical
    • About Cutting Fluids
    • Definitions
    • Coolant Questionaire
    • Troubleshooting
  • News
  • Contact

NEWs

ACS Coolant Proportioner & Mixer Set-Up & Operation

8/14/2019

0 Comments

 
Our Coolant proportioner and Mixer is designed for mixing liquid coolant concentrate with water for supply to CNC machines. It's driven by pressure from the shop water supply which is typically a max of 60 psi. It has a precision CNC machined from Stainless Steel Rotary Disc Valve to adjust your concentricity. The lightweight aluminum body has a compact construction & minimal parts make our mixer easy to install & highly reliable. It Includes full flow Brass Ball valve & also fitted with 2 back flow preventers
Picture
Adjustment of mixing ratio is variable & controlled through a simple turn of the knob
INSTALLATION & OPERATION
  1. The mixer is already assembled with a hose & Shut Off Valve. Push the Suction Tube into Bung Nut.
  2. Insert the Suction Tube into the drum & tighten Bung Nut to secure the Coolant Mixer onto the drum.
  3. Connect the 1/2” female threads of Shut Off Valve with the water supply.
  4. Turn the Regulator Knob to the desired setting.
  5. Open Shut Off Valve fully to start the water supply. The Mixer will continuously dispense the desired mixture untill the water supply is ON.
  6. Take a sample of the dispensed mixture & check its concentration with a Refractometer. Use Regulator Knob to increase or decrease the concentration until you get the precise Mix.

Important to Note

  • The Mixture Ratios have been specified after testing at a water pressure of 57 PSI (4 kg / cm2)
  • Actual Mixture Ratios may vary as per the water pressure.
  • Higher water pressure leads to higher concentration & vice versa.
  • The Regulating Scale effectively gives a value based on trial & error. It should not be taken as an absolute Percentage Ratio.
ACS Cooant Prportioner Installation

​CAUTION

  • The Mixer must be mounted horizontally within +/- 10° (because of the ball check valve).
  • The outlet is supplied with a PVC Hose which must always be open.
  • Hose must not be connected to any device that can restrict liquid flow.
0 Comments



Leave a Reply.

    Author

    Write something about yourself. No need to be fancy, just an overview.

    Archives

    May 2020
    March 2020
    January 2020
    November 2019
    October 2019
    September 2019
    August 2019
    July 2019
    June 2018

    Categories

    All
    Aluminum
    Application Story
    Brix Scale
    Chlorinated Olefins
    Chlorine
    Concentration
    Conversion Chart
    Coolant Mixer
    Coolant Proportioner
    Delta Cool 120
    Installation
    NanoTech 6800
    Refractometer
    Tech Tip
    Testimonial

    RSS Feed

Definitions
Terms & Conditions
​SDS Request
Literature
​Shipping Policy
​Sales Policy
Warranty
MAILING ADDRESS
1114 North Court #196
Medina, OH 44256
PLANT ADDRESS
150 Allen Street
Orrville, OH 44667
Copyright © 2020 Advanced Chemical Solutions. All rights reserved.